AHP Merkle Std. Cylinders AHP merkle catalogues    
We will be exhibiting at Interplas on the 26th, 27th and 28th of September 2017 in NEC, Birmingham UK.
Cylinder-Technology CyPull Core-pulling Cylinders CyBlock Block Cylinders
CyTec NC Products CyMill Milling Heads CySpeed Motor Spindles CyTurn Rotary Tables
CyTec Systems UK Ltd. Unit H - 100 Shaw Road (Off Daltry Street) Oldham, OL1 4AB United Kingdom Tel.: +44 (0) 161 / 678 70 90 Fax:  +44 (0) 161 / 620 53 92 E-mail:  sales@cytec-uk.com
Locking and holding cylinders 
Hydraulic/Pneumatic cylinder with positive locking
In modern production, hydraulic and pneumatic cylinders are standard for linear stroke movements. When guaranteed rigidity under load and failsafe function is required the CyLock cylinder with positive locking is the right choice. Due to its positive locking at the end of stroke, many interesting and easy technical solutions are possible. The cylinders enable a considerable simplification of complicated conventional construction. No additional mechnanic or steering is required. The positive locking automatically becomes effective when the cylinder reaches the lockable final position. It remains locked even when the pressure is disconnected. Since the holding force in the locked position is many times that of the cylinder's hoisting power, high counterforces can also be safely absorbed
Pneumatic cylinder with internal braking device
The benefits of pneumatics such as velocity, high duty cycles and economy, aid automation. With it the following main requirements on the system are made: . Drop protection for a lifted load in any position . Holding intermediate positions . Low moving but high retaining power . Quick stopping of power Normally these demands are only achievable with additional equipment
CyStop is a special element, that allows a solution to nearly every problem in automation industry by considerably simplifying the technical design. As a combination of a pneumatic cylinder with an integrated braking and holding device, it allows immediately stopping the stroke movement in any position. The cylinder automatically brakes when one of the connections of the cylinder is released. The mechanism is based on the principle of frictional connection and can be activated in any position.
CyTec 2017
Locking and holding cylinders 
01 61 678 70 90
CONTACT
CyTec Systems UK Ltd. Unit H - 100 Shaw Road (Off Daltry Street) Oldham, OL1 4AB United Kingdom Tel.: +44 (0) 161 / 678 70 90 Fax:  +44 (0) 161 / 620 53 92 E-mail:  sales@cytec-uk.com
CyTec 2017
Hydraulic/Pneumatic cylinder with positive locking
In modern production, hydraulic and pneumatic cylinders are standard for linear stroke movements. When guaranteed rigidity under load and failsafe function is required the CyLock cylinder with positive locking is the right choice. Due to its positive locking at the end of stroke, many interesting and easy technical solutions are possible. The cylinders enable a considerable simplification of complicated conventional construction. No additional mechnanic or steering is required. The positive locking automatically becomes effective when the cylinder reaches the lockable final position. It remains locked even when the pressure is disconnected. Since the holding force in the locked position is many times that of the cylinder's hoisting power, high counterforces can also be safely absorbed
Pneumatic cylinder with internal braking device
The benefits of pneumatics such as velocity, high duty cycles and economy, aid automation. With it the following main requirements on the system are made: . Drop protection for a lifted load in any position . Holding intermediate positions . Low moving but high retaining power . Quick stopping of power Normally these demands are only achievable with additional equipment
CyStop is a special element, that allows a solution to nearly every problem in automation industry by considerably simplifying the technical design. As a combination of a pneumatic cylinder with an integrated braking and holding device, it allows immediately stopping the stroke movement in any position. The cylinder automatically brakes when one of the connections of the cylinder is released. The mechanism is based on the principle of frictional connection and can be activated in any position.
CyTec Systems UK Ltd. Unit H - 100 Shaw Road (Off Daltry Street) Oldham, OL1 4AB United Kingdom Tel.: +44 (0) 161 / 678 70 90 Fax:  +44 (0) 161 / 620 53 92 E-mail:  sales@cytec-uk.com
+44 1 61 678 70 90